BNWQQ - TORRSEAL PART A
- MSDS: BNWQQ
- Manufacturer: VARIAN ASSOCIATES
- Product Name: TORRSEAL PART A
- National Stock Number: 8030-00-998-3321
Product Identification
Product ID:TORRSEAL PART A
MSDS Date:05/20/1986
FSC:8030
NIIN:00-998-3321
Kit Part:Y
MSDS Number: BNWQQ
Responsible Party
PALO ALTO, CA 94303
US
Emergency Phone: 415-493-4000
Info Phone: 415-493-4000
Cage: 7S575
Contractor
Telephone: 415-493-4000
Cage: 7S575
Ingredients
MAGNESIUM SILICATE HYDRATE
CAS: 1343-90-4
RTECS: OM4360000
Fraction By Weight: 46%
ACGIH TLV: 2 MG/M3
BIS PNENOL A-EPICHLORONYDRIN EPXY RESIN
Fraction By Weight: 50%
TITANIUM DIOXIDE
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 2 - 10%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
Hazards
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Health Hazards Acute and Chronic:MAY BE MILDLY IRRITATING TO SKIN.
Effects of Overexposure:CONTACT WITH SKIN OR EYES MAY CAUSE IRRITATION.
Medical Cond Aggravated by Exposure:NONE KNOWN.
First Aid
First Aid:IN CASE OF SKIN CONTACT WASH WITH SOAP AT FIRST OPPORTUNITY.
IN CASE OF EYE CONTACT FLUSH WITH COPIOUS AMOUNTS OF WATER FOR 15
MINUTES.
Fire Fighting
Flash Point Method:COC
Flash Point:470F,243C
Extinguishing Media:CO2, FOAM, OR DRY CHEMICAL.
Fire Fighting Procedures:NONE.
Unusual Fire/Explosion Hazard:NONE.
Accidental Release
Spill Release Procedures:SCRAPE UP, TRANSFER TO METAL CONTAINER.
SOLVENTS MAY BE NECESSARY TO CLEAN UP STICKY RESIDUE, BUT OBSERVE
HEALTH AND FIRE HAZARDS OF SOLVENT.
Handling
Handling and Storage Precautions:STORE AWAY FROM DIRECT HEAT, WHICH
MIGHT CAUSE PHYSICAL SEPARATION OF FILLER.
Exposure Controls
Respiratory Protection:NONE REQUIRED.
Ventilation:LOCAL EXHAUST: ONLY IF HEATED.
Protective Gloves:RUBBER OR PLASTIC.
Eye Protection:GOGGLES WHERE THERE IS DANGER OF SPLASH.
Other Protective Equipment:NONE REQUIRED.
Supplemental Safety and Health
Chemical Properties
Melt/Freeze Pt:M.P/F.P Text:0F,-18C
Vapor Pres:NIL
Spec Gravity:1.6 (WATER=1)
Evaporation Rate & Reference:>1 (BU AC=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:WHITE HIGH VISCOUS LIQUID, VERY SLIGHT ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products:CARBON MONOXIDE, ALDEHYDES.
Conditions to Avoid Polymerization:DO NOT MIX LARGE AMOUNTS OF EPOXY
RESIN WITH DIETHYLENETRIAMINE WITHOUT RECOGNITION OF DEVELOPMENT OF
EXOTHERMIC HEAT.
Disposal
Waste Disposal Methods:THIS IS NOT A HAZARDOUS MATERIAL UNDER THE
RESOURCE CONSERVATION AND RECOVERY ACT (RCRA).
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.